You have selected România. Based on your configuration, United States might be more appropriate. Do you want to keep or change the selection?

Comunicat de presă pagină detaliată | TRUMPF

Laser welding of glass is now ready for industrial practice

A new femtosecond laser system by TRUMPF facilitates economical, high-quality glass welding, with no additional material required – the process is already in use in the production of laser light cables at TRUMPF

Ditzingen, July 20, 2016 – Economical, high-quality laser-welding for glass? That posed a major challenge – until now! The laser specialist TRUMPF has developed a femtosecond laser system that replaces conventional joining processes such as glueing. The advantage: in contrast to glueing processes, no additional materials that are susceptible to evaporation or embrittlement are required. This reduces costs and increases durability as well as the stability of the seam. The special nature of glass poses considerable challenges with regard to processing: glass is hard and brittle, has lower thermal conductivity than metal and tends to crack when heated unevenly due to the internal tension developed. Femtosecond laser systems can prevent such cracking. “The laser system must permit variable programming of pauses and pulses,” explains Elke Kaiser, applications engineer at TRUMPF.

Glass is permeable to light with wavelengths ranging from ultraviolet to near infrared. Absorption takes place only when the energy densities are very high, so that processing within the glass is facilitated. The highest performance density lies deep in the lower glass at the focal point. The energy from several thousand laser beam pulses causes a melt pool to be created and pushed upwards in just a few milliseconds. Skillful thermal management and an optimal ratio of pulses and pauses prevent the glass from cracking.

Protective caps for laser light cables are laser-welded instead of glued
Glass components that were previously glued to each other can now be economically welded with high-quality results, as TRUMPF has demonstrated in its own production of laser light cables. Until recently, the lids of the protective caps for the laser light cables were glued on. Now, lasers are used to weld them on. The joint strength of the glass parts depends primarily on the level of pulse energy. The pulse energy for 1030 nanometer infrared light needs to be 9 microjoule.

TRUMPF is currently building a laser-welding system for reliable glass welding for mass production of the protective caps for the laser light cables in its own production plant in Schramberg. Elke Kaiser states, “The laser system also serves as a pilot system to demonstrate to potential users that new, innovative laser methods are reliable and ready for deployment in glass processing and offer immense advantages.” The new laser welding methods for glass prove their economy and efficiency by eliminating the disadvantages of conventional methods such as glueing: optical beam paths are no longer contaminated, there is no evaporation and no long-term embrittlement of adhesives, which means that the protective caps made of glass will be considerably more durable. TRUMPF is currently preparing further applications for the laser welding of glass for use in its own production.

Digital photographs in print-ready resolution are available to illustrate this press release. They may only be used for editorial purposes. Use is free of charge when credit is given as “Photo: TRUMPF”. 

Laser light cables

TRUMPF has demonstrated in its own production that the process of welding the glass protective caps using femtosecond lasers is ready for industrial use.

Breakage test

Laser-welded protective caps are more than twice as strong as conventionally joined caps in breakage tests.

Persoană de contact

Athanassios Kaliudis
Purtător de cuvânt Tehnologie laser, fabricație aditivă și circuite electronice
Athanassios Kaliudis Corporate communications representative TRUMPF
Service și contact