No matter what you want to bend – with the bending tools from TRUMPF, you can achieve it. Choose from a comprehensive range of bending tools or have special tools created to your requirements. With the TRUMPF sensor tools for direct angle regulation in the bending process, you can successfully produce the first part in a series perfectly. Lightweight tools lessen the load of your day-to-day work.
No matter what you would like to bend – TRUMPF will develop the right tool solution for you.
You can look forward to a quick tool solution and delivery.
Get the best out of your bending machine – in-depth and expert advice will show you how this is possible.
You can order all TRUMPF bending tools as a set or individually. With more than 150 different upper and lower tool types in stock, numerous part geometries are possible.
Improved set-up: The patented lightweight tools from TRUMPF are up to 35% lighter. All common upper tools are also available in a lightweight design.
TRUMPF sensor tools operate according to the tried-and-tested Automatically Controlled Bending measuring principle. Sensor disks which are integrated in the tool shape, perform measurements directly in the processing area.
LASERdur ZN and LASERdur AL coating
Our specially coated bending tools mean that unwanted adhesions of aluminum or zinc caused by sheet abrasion, and the resulting marks and inaccuracies, are a thing of the past. With LASERdur AL and LASERdur ZN, you benefit from high-quality coatings that combine a high surface hardness of your tools with outstanding sliding properties. An added bonus: the coated tools are corrosion-resistant and do not need to be cleaned.
Bending with RollBend
The RollBend tool enables you to create low-mark, short side lengths, as well as moldings and holes, close to the bending line, without causing deformation. It can be combined with standard dies.
ToolShuttle tool magazine
The ToolShuttle centrally supplies up to two bending machines with bending tools. You can store up to 525 feet of tools in its storage area measuring just 63.5 ft2. Unlike conventional solutions there is no need for searching or transit times as the tools are located directly at the machine. The tools are provided automatically and can be ergonomically moved from the tool magazine to the setup position via a moving table. As an additional benefit, the ToolShuttle also comes with an integrated air dryer which protects the tools against corrosion.
Take advantage of TRUMPF's expertise and have special tools produced, specifically to your requirements. TRUMPF provides you with consultation, develops, constructs, and tests your special tools.
Complete hinge tool
The tool is designed for hinges with fixed dimensions (sheet thickness, hinge diameter, and hinge extent) and is used without a backgauge as the gauge is integrated in the tool. This enables door hinges to be produced quickly, for example.
Pivoting window tool
The tool with a pivoting window is used to bend closed profiles or U parts. The use of a pivoting adapter makes it possible/easier to remove products, saving you time and money.
During the bending procedure, the support areas of the sides press evenly against the sheet. There is almost no relative movement between the tool and the workpiece.
Louver tool for closed tool contours
Louvers can be produced by forming the sheet on the die bending machine. Louvers are usually used as ventilation slots on housings.
Forming tool for radius bends (circular part)
A circular part is produced by the form lock between the upper and lower tool. The bend radius is determined by the tool radius (depending on the sheet thickness, material type, etc.). Circular parts can be used as handrails for staircases, for example.
Tool for wide U part
This tool can be used to produce very tall U profiles in a single step. To prevent the product from sticking in the die, an ejector and gas springs push the profile out of the lower tool.
Large rotating jaw tool
This tool can be used to produce very tall U parts. The rotating jaws compensate for the springback in the material caused by overbending. This tool eliminates the need for prebending and folding.
Offset tool for C parts
C parts are generally created using gooseneck punches. The height and throat depth of these can be individually adapted.
TRUMPF bending film
The bending film is placed over the lower tool and so prevents imprints that could occur on the workpiece due to friction with metal.
Die with R3 catchment radii
These dies have significantly larger working radii. They are used to ensure that the film does not tear and that there are no visible abrasion marks on the material surface when film-coated sheets are bent.