The combination of the TruMark Station 5000 and the TruMicro Series 2000 provides an all-around, turnkey solution – the TruMicro Mark 2000. It is ideally suited for customers looking for a laser marking unit with picosecond and femtosecond pulses. With peak pulse powers of 0.5 MW, these lasers are used for processes where cold material processing is productive even with moderate average powers.
Compact, light, productive – the TruMicro Series 2000
Whether for structuring, ablating, cutting, or drilling: the laser has become an essential tool in micro-production technology. With its short and ultrashort TruMicro pulse lasers, TRUMPF offers innovative solid-state lasers that are tailored precisely to these tasks. They make it possible to perform micro-processing with an optimal combination of quality, productivity, and profitability. The fiber-based ultrashort pulse lasers in the TruMicro Series 2000 are distinguished by their compact and light design. Integrating the laser is made significantly easier by using a laser light cable for ultrashort pulse lasers (LLK-U). With their moderate average power they are ideally suited for foil cutting and the ablation of thin layers.
Cutting ultra-thin glass
Laser modification cutting allows ultra-thin glass (50 µm) to be cut with the highest edge quality. This significantly increases the rigidity.
TRUMPF TOP Weld optics focus femtosecond-long laser pulses to weld glass to glass or glass to metal with high precision. The result is a high-tensile and practically invisible bond.
Ultrashort pulse lasers enable a variety of different processes. By varying the laser parameter set, metal surfaces can be cleaned, structured and engraved.
Cutting organic material
The combination of ultrashort durations with high intensity enables microprocessing with incomparable precision. Even highly sensitive organic material can be cut without damaged or burned edges.
|Average output power||10 W||20 W|
|Beam quality (M²)||< 1.3||< 1.3 optional < 1.2|
|Wavelength||1030 nm||1030 nm|
< 900 fs
< 400 fs
20 ps optional 900 fs
400 fs or variably adjustable from < 400 fs - 20 ps
|Maximum pulse energy||10 µJ Option: 20 µJ and 50 µJ||20 µJ optional 50 µJ or 100 µJ|
|Maximum repetition rate||1000 kHz Option: 2000 kHz, 200 kHz for 50 µJ pulse energy (10 W)||1000 kHz optional 2000 kHz, 400 kHz at 50 µJ pulse energy (20 W) or adjustable from 200 kHz (100 µJ pulse energy) to 2 MHz (10 µJ pulse energy)|
|Dimensions of laser head (W x H x D)||570 mm x 360 mm x 180 mm||570 mm x 360 mm x 180 mm|
|Dimensions of supply unit (W x H x D)||510 mm x 485 mm x 180 mm||510 mm x 485 mm x 180 mm|
TruControl is the quick and easy-to-use control for TRUMPF solid-state lasers. It regulates the laser power in real time in order to deliver reproducible results. TruControl manages, controls, and visualizes the interface configuration. You benefit from a uniform control architecture across all laser technologies. The lasers have interfaces to control intelligent TRUMPF optics, such as monitored CFO focusing optics or PFO scanner optics. You can easily program the processing optics via the laser control system. The remote support service provided by TRUMPF means that you receive off-site support within seconds. This will allow you to avoid service calls or be as prepared as possible and increase the availability of the laser device.
With the useful options of the TruMicro Series 2000 lasers you can work more efficiently and with more process reliability.
Forego elaborate free-beam guidance and significantly simplify the machine design: instead of the free-beam guidance, the laser pulses are guided through the hollow core fibers from the laser source to the optics. The laser can be integrated in the processing machine much more flexibly thanks to this thermal and mechanical decoupling between the TRUMPF laser and the corresponding optics. The beam and pulse properties remain unaffected.
Interfaces are key for the integration of a TruMicro laser in your machine or production line. The solid-state lasers from TRUMPF offer interfaces to all common fieldbus systems. Also available: real-time interface, parallel digital I/O, interface for process sensor systems, OPC UA software interface, analog input board, interface for intelligent TRUMPF optics (CFO, PFO).
In the event of a fault, TRUMPF service experts will remotely access your laser via a secure remote connection. In many cases the fault can be remedied directly in this way, or the configuration of the laser can be modified in a way that permits you to continue manufacturing until the spare part arrives.
Multiple control loops in conjunction with a patented fast external modulator guarantee maximum process stability with the TruMicro Series 2000 as well as the set pulse parameters for each individual pulse.
If complex geometries are processed with scanners, for example when cutting polymer films, the acceleration and brake paths of the scanner lead to varying spatial intervals of the ultrashort laser pulses on the material. This means that the processing quality depends on the processing geometry. On the other hand, the repetition rate is adapted to the scan speed with the "Flexible Pulse on Demand" option, facilitating constant pulse intervals. This not only means that the process result is independent of the processing contour, but that the process time is decreased as well.
TRUMPF offers you all the components you need for beam guidance from the laser to the workpiece. This also applies for various focusing optics which have proven themselves to be precise and reliable over many years of industrial use. The optics can be easily integrated – both in stand-alone processing stations as well as in complete production lines. The modular structure enables the optics to be continually adapted to the laser types and various processing situations.
TOP Cleave cutting optics
The TOP Cleave-2 focusing optics are processing optics for high-dynamic cutting of transparent materials, for example glass or sapphire.
Ultrashort laser pulses are not only ultrashort; they also achieve peak values for pulse qualities such as energy and power. To ensure that the correct pulse is applied on the workpiece despite the peak intensity, special beam guidance and formation elements are required. TRUMPF offers beam switches, deflectors, beam expanders, and polarization optics that are optimized for use with ultrashort pulse lasers.
TruMicro deflectors are suitable for ultrashort laser pulses for guiding the laser beam while maintaining the pulse parameters.
With beam switches, the laser light from one beam source can be guided in two light paths for different workpieces. The pilot laser enables simple adjustment of the beam guidance and makes this as convenient as possible for you.
With a beam splitter two light paths can be powered at the same time, each with half the laser power. This allows you to work on two workpieces at the same time. The mechanical setting makes it possible to adjust the divided power precisely to the uniform distribution in both beam arms.
Circular polarized light is produced from linear polarized light with the help of a quarter wave plate and makes it possible to achieve consistent processing results for applications with directional production geometries.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.