We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
TruMicro Series 7000, built for maximum performance.
TruMicro Series 7000, built for maximum performance.
Short and ultra-short pulse lasers

TruMicro Series 7000

Built for maximum performance

    - / -
    • Overview
    • Applications
    • Technical data
    • Options
    • Software
    • Focusing optics
    • More Less
    Specialist for large surfaces

    The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology and combine short pulses with high pulse energies, even with high frequencies and for all conventional wavelengths (infrared, green, ultraviolet). The lasers are therefore best-suited to large-scale and quick ablation, drilling, or cutting with maximum throughput. With the flexible beam guidance, you can integrate the laser effortlessly into your manufacturing system.

    Short pulses – high performance

    The ideal combination for your microprocessing requirements.

    One disk – a range of uses

    You can also clean or temper large components.

    Full power

    The internal power regulation provides the full pulse energy for your process.

    Optical arrangement of the TruMicro Series 7000
    Built for maximum performance

    The particularly powerful short-pulse lasers of the TruMicro Series 7000 can ablate layers quickly and on a large scale, can drill, or can cut with a high throughput. With pulse energies of up to 80 mJ, they can achieve tremendous decoating rates with an excellent level of efficiency. You can vary the rate of repetition of the lasers while maintaining an even pulse duration, thereby optimising your machining processes. Large surfaces can be ablated particularly efficiently through the use of scanners. The beam is guided via a flexible optical laser cable or other suitable beam guidance components. This enables easy integration in your manufacturing system.

    TruMicro 7240 with optical laser cable
    Full power

    With up to 850 W (TruMicro 7060), the devices of the TruMicro Series 7000 boast the highest average power for erosive microprocessing. The short laser pulses are guided from the beam source to the processing location via an optical laser cable.

    Plastic-metal hybrid connection

    Plastic-metal hybrid connection

    Automobile manufacturers are increasingly turning to lightweight design in order to reduce the consumption and CO2 emissions of their vehicles. Hybrid metal-plastic connections are playing an increasingly important role here, since they combine the high strength and rigidity of metals with the low weight and great design freedom of plastic, for example. The high-performance nanosecond lasers of the TruMicro Series combine metal and plastic perfectly and without any additional materials, such as screws, rivets or adhesives.

    Edge deletion and isolation of thin-film solar modules

    Edge deletion of thin-film solar modules

    In order to protect thin-film solar modules against corrosion and long-term short circuits, the layer system at the edge of the module is removed and then laminated. In this application, the laser penetrates the glass and splits off the layer system from the carrier material, without causing any cracks or fusing on the glass. In comparison to conventional sandblasting, there are no costs for the blasting medium or its supply. Furthermore, the excellent process properties ensure extremely high decoating rates.

    Welding preparation of AlSi-coated steel sheets

    Welding preparation of AlSi-coated steel sheets

    The nanosecond lasers of the TruMicro Series 7000 are ideal for the efficient ablation of aluminium-silicon coats – without changing the basic material. In the automotive industry in particular, steels are coated with aluminium-silicon (AlSi) as an anti-corrosion agent. For perfect welding results, this coating must be removed in the welding seam area.

    Paint removal with TruMicro Series 7000 lasers

    Cleaning and paint removal with short-pulse laser

    The short-pulse laser enables paints, residual adhesives, or oxide films to be partially or fully removed from surfaces without damaging the basic material. The laser meets user requirements in terms of edge and ablation quality in particular, however the laser process also competes with conventional processes when it comes to cost efficiency.

    TruMicro 7050
    TruMicro 7060
    TruMicro 7240
    Laser parameters      
    Average output power 750 W 850 W 300 W
    Beam quality 20 mm▪mrad 20 mm▪mrad 5 mm▪mrad
    Wavelength 1030 nm 1030 nm 515 nm
    Pulse duration 30 ns 30 ns 300 ns
    Max. pulse energy 80 mJ 80 mJ 7.5 mJ
    Min. repetition rate 5 kHz 5 kHz 20 kHz
    Max. repetition rate 100 kHz 100 kHz 100 kHz
    Min. laser light cable diameter 400 μm 400 μm 100 μm
    Structural design      
    Dimensions of supply unit (W x H x D) 1460 mm x 1350 mm x 730 mm 1460 mm x 1350 mm x 730 mm 1460 mm x 1350 mm x 730 mm
    PDF <1MB
    Technical data sheet

    The technical data of all product versions as a download.

    With added options, you can work even more efficiently and with more process reliability with the high-performance nanosecond lasers of the TruMicro Series 7000.

    Optical arrangement of the TruDisk laser
    Flexible integrated beam guidance

    There are many different options for the beam guidance that will enable you to plan flexibly with your laser. The plug & play optical laser cables can be easily connected to different work stations. Here, you choose the number of fibre outlets up to a total of four. The laser power is regulated for each outlet. This allows multiple work stations to operate simultaneously with split laser power or one after the other with full laser power. With the modular system, you can even retrofit this splitting functionality.

    TRUMPF laser network
    TRUMPF laser network

    With the laser network, you can connect one or more lasers with up to four work stations in each case. In the process, your laser either splits its power to multiple stations, or it supplies them by turns with full power. This will enable you to combine different applications with one another.

    Intelligent down to the workpiece

    Intelligent optics can be synchronised with your laser via a dedicated interface. This will allow you, for example, to use the CFO focusing optics or PFO scanner optics optimally for your purposes. You can program the processing optics easily using the laser control system. You do not need any additional PCs or control systems.

    Remote Services

    In the event of a fault, TRUMPF service experts will remotely access your laser via a secure remote connection. In many cases the fault can be remedied directly in this way, or the configuration of the laser can be modified in a way that permits you to continue manufacturing until the spare part arrives.

    TruControl control

    TruControl

    TruControl is the quick and easy-to-use control for TRUMPF solid-state lasers. It regulates the laser power in real time in order to deliver reproducible results. TruControl manages, controls and visualises the interface configuration. You benefit from a uniform control architecture across all laser technologies. The lasers have interfaces to control intelligent TRUMPF optics, such as monitored CFO focusing optics or PFO scanner optics. You can program the processing optics easily using the laser control system. With the Teleservice from TRUMPF you will also receive remote support in seconds. This will allow you to avoid service calls or be as prepared as possible and increase the availability of the laser device.

    TRUMPF offers you all the components you need for beam guidance from the laser to the workpiece. This also applies for various focusing optics which have proven themselves to be precise and reliable over many years of industrial use. The optics can be easily integrated – both in stand-alone processing stations as well as in complete production lines. The modular structure enables the optics to be continually adapted to the laser types as well as the different processing situations.

    Fixed optics

    Whether for welding, cutting, ablating, heating up or drilling: with robust fixed optics from TRUMPF you can attain high-quality process results!

    BEO D70 focusing optics with observation camera, crossjet and aerator nozzle
    BEO D70

    Large working distances with small focal diameters

    Scanner optics

    The ideal optics for remote processing

    TRUMPF processing optics
    PFO 33

    Welding and drilling with the programmable focusing optics PFO

    This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

    You may also find these topics interesting

    Technologiebild TRUMPF Scheibenlaser
    Lasers

    Whether it's cutting, welding, marking or processing surfaces: with TRUMPF, you benefit from the flexibility, versatility and cost-efficiency provided by lasers.

    Verfahrensoptimierung
    Application consultation

    You can broaden your knowledge and optimise your processes with an application consultation from TRUMPF.

    Mikrobearbeitung mit TRUMPF Produkten
    Microprocessing

    In micro-production, short-pulse lasers are used wherever controlled, highly accurate and reproducible processing is required.

    Contact

    TRUMPF Ltd.
    Fax: +44 1582 399260
    E-mail

    Downloads

    Beam sources brochure
    Beam sources brochure
    pdf - 9 MB
    Short and ultrashort pulse laser brochure
    pdf - 2 MB
    Service & contact