The TruMatic 6000 fiber combines highest process reliability and flexibility. The solid-state laser opens up a wide range of materials to you, and processes thin sheets with cutting speeds of up to 1338 in/min. In this way, you can process non-ferrous metals, film-coated stainless steel, and galvanized sheet particularly productively. Intelligent solutions for operation parallel to production ensure that your investment pays off even faster. Various automation options guarantee process-reliable operation during the night and on the weekend.
Cutting speeds of up to 1338 in/min ensure your thin sheet processing is highly productive.
The solid-state laser guarantees a high level of efficiency and an excellent energy balance.
The descending die enables scratch-free punching and forming processes.
The TruDisk cuts non-ferrous metals, film-covered stainless steel, and galvanized sheets efficiently.
You can remove parts in a process reliable way via sensor-protected flaps.
With the SheetMaster, you can load, unload, and sort parts in a process reliable and automated way.
High quality outer contours and delicate inner contours: With the slim laser head of a TruMatic, you can cut very near to, or even on, forms which have already been created. You can also achieve unusual contours with process reliability. You can process non-ferrous metals such as brass, copper, or titanium to the highest quality due to the solid-state laser. You can integrate formed sections quite easily into the process sequence. In the process, the material is always handled gently, and carefully removed from the machine.
The TruDisk solid-state laser is resistant to reflections. Even highly reflective materials such as copper or brass can be processed without affecting process reliability.
|
TruMatic 6000 fiber medium format
|
TruMatic 6000 fiber large format
|
|
|---|---|---|
| Dimensions | ||
| Width | 9231 mm 1 | 9945 mm 1 |
| Depth | 8003 mm 1 | 8862 mm 1 |
| Height | 2500 mm 1 | 2500 mm 1 |
| Maximum stroke rate | ||
| Punching (E = 1 mm) | 1000 1/min | 917 1/min |
| Marking | 2800 1/min | 2800 1/min |
| Working range | ||
| Punching mode, X axis | 2500 mm | 3050 mm |
| Punching mode, Y axis | 1250 mm | 1550 mm |
| Laser operation, X axis | 2500 mm | 3050 mm |
| Laser operation, Y axis | 1250 mm | 1550 mm |
| Combined operation, X axis | 2500 mm | 2500 mm |
| Combined operation, Y axis | 1250 mm | 1550 mm |
| Maximum sheet thickness | 6.4 mm | 6.4 mm |
| Maximum workpiece weight | 150 kg | 230 kg |
| Maximum punching force | 180 kN | 180 kN |
| Tools | ||
| MultiTool tool changing time | 0.3 s | 0.3 s |
| Number of tools/clamps | 22 pieces / 3 pieces | 22 pieces / 3 pieces |
| Laser-specific data - TruDisk 3001 | ||
| Maximum laser power | 3000 W | 3000 W |
| Maximum sheet thickness, mild steel | 6 mm | 6 mm |
| Maximum sheet thickness, stainless steel | 6 mm | 6 mm |
| Maximum sheet thickness, aluminum | 5 mm | 5 mm |
| Maximum sheet thickness, copper | 6 mm | 6 mm |
| Maximum sheet thickness, brass | 6 mm | 6 mm |
| Part removal | ||
| Maximum part size, part removal flap, punching | 500 mm x 500 mm | 500 mm x 500 mm |
| Maximum part size, fixed chute, punching (with moving table) | 80 mm x 50 mm | 80 mm x 50 mm |
| Maximum part size, part removal flap, laser | 500 mm x 500 mm | 500 mm x 500 mm |
| Consumption values | ||
| Average power input in production - TruDisk 3001 | 15 kW | 15 kW |
| Auto-shutdown active - TruDisk 3001 | 0.6 kW | 0.6 kW |
The technical data of all product versions as a download.
With the TruDisk solid-state laser and the descending die, you can process the entire material spectrum, including formed sections, at an outstanding quality level. You can even cut copper and brass reliably with optimum edges.
The descending die enables scratch-free punching and forming processes. If required, the die can be lowered during positioning so the sheet does not have any contact with the die – for both punching as well as higher forming dies. When forming downwards, there is no longer the risk of things getting caught.
For sensitive materials, which must not have any scratches underneath, you can use brush tables combined with the descending die. Parts which are to be subsequently painted, can also be processed on the handy ball table.
Smart load supports sheet alignment on the machine. A sensor in the clamps detects when they do not clamp the machine correctly. If this is the case, the machine table, including sheet, moves.
If a finished part does not fall through the part removal flap as expected, a sensor detects this and it is rectified by the machine. Your part is detached and is removed safely.
Before the tool change, smart punch monitoring checks whether a hole was actually punched into the sheet. In this way, the machine detects at an early stage when punches are broken, and can pass this information on to the operator. This means that you can avoid rejects, particularly during night and weekend shifts.
Seamless integration of multiple TRUMPF machines into your own software environment is very easy. We have the right solution for every combination, whether it be integration into Oseon or a connection to monitoring and analysis tools. A connection to third-party software systems is also possible with our interfaces based on the OPC UA standard.
During the punching of sheet metal, compression and tensile stresses are placed on the workpiece which can cause sheet deformation. The integrated flattening machine function and the corresponding tool make it possible to even out surface irregularities during the punching process itself.
The protective glass reduces lens wear by optimally protecting the beam guidance against dirt. Due to a special coating and the highest purity of the lens, the best cutting results are guaranteed.
With the MobileControl app from TRUMPF you can operate and monitor your machines easily and with flexibility as the app transmits the interface of the standard control panel onto the touch screen of your tablet PC. In addition to the static control panel, you have another option for monitoring and controlling your machine.
The TruMatic 6000 fiber is available in different sizes. The large version enables the processing of parts in a working area of up to 120 x 42 inches. This means even particularly large parts can be processed and more part geometries are possible.
Construct and program your laser, punching, and combination punch laser machines intelligently with TruTops Boost, your all-in-one 3D solution. Numerous automated processes save you time-consuming routine processes and the joint nesting pool saves time and material. You also always have an overview of all manufacturing orders and order-based work.
The software portfolio from TRUMPF optimizes your entire production process – from the customer query through to delivery of the finished part. TRUMPF combines the software intelligently with machines and services to create customized Industry 4.0 solutions for your Smart Factory.
You can use the roller technology to create straight and curved beads of any length in the sheet. This produces high-quality workpieces without visible forming marks.
Deburr geometries of different sizes directly on the machine. As such, you benefit from perfectly deburred workpieces and shorter production times.
Using the engraving tool you can mark sheet metal parts in path mode with flexibility. The non-cutting processing ensures results of the highest quality.
TRUMPF offers the world's largest range of punching tools on the market. You will find the perfect solution for every punching and forming application.
With the automation of your TruMatic 6000 fiber, you profit from higher machine utilization, and increased process reliability in automated multiple-shift operation. The modular concept also provides you with flexibility.
The SheetMaster guarantees the fast and process-reliable loading, unloading, unstacking, and sorting of your finished parts.
The SortMaster Box automatically sorts small parts which are removed via the punching or laser flap.
The GripMaster ensures convenient scrap skeleton handling. It removes scrap skeletons and remainder strips automatically and stacks them on a scissor table.
The ToolMaster provides space for 40 to 70 tools which are automatically positioned in the linear magazine of your machine. This means you can complete even complex orders with numerous tool changes quickly and automatically.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Footnotes
