TruTool N 700, dimensional drawing
Perfect for dismantling work
With its light weight of just 22 lbs., the TruTool N 700 can cut sheet thicknesses of 0.25 in. It cuts through doubled sheets as well as bends of up to 90° and is, therefore, perfect for dismantling work. The two handles can be quickly swapped, making it easy to perform work in a wide range of situations. The compact handle is ideal for restricted spaces and the bow-handle is well-suited to all work situations.
Cutting directions
The machine can be turned through 360° in 4 steps of 90°.
Rectangular punch with flexibility for profiles
Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.
Minimal force required
You work without feed force so the required force is reduced to a minimum.
Surprisingly lightweight
Unbeatable weight-performance ratio of 22 lbs. against a sheet thickness of 0.25 in.
Flat sheet
For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.
Profiles
For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.
Coil processing
For cutting coils. For relief cuts and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
Standard punch (integrated)
1 unit 2260200
Die 7 (integrated)
1 unit 1884878
Bow-handle
1 unit 1279590
Compact handle
1 unit 1279618
Allen key
1 unit 0067857
Tube of grease "G1", 0.88 oz
1 unit 0344696
Setting gauge
1 unit 1411767
TRUMPF Box L2
1 unit 1763686
Find the right consumables and accessories for your machine here.
Standard punch
For processing aluminum and mild steel
1 unit
2260200
Set of 2
1264117
Set of 5
1264119
Punch CR
For processing stainless steel
1 unit
2260201
Set of 2
1264414
Set of 5
1264415
Die P7
Well-suited for the processing of profile sheets, aluminum, and mild steel from 0.2 - 0.27 in.
1 unit
1884877
Set of 2
1264174
Die No. 5
For processing aluminum, mild steel, stainless steel 85,000 up to 0.2 in., and stainless steel 114,000 up to 0.1 in.
1 unit
1884879
Set of 2
1264173
Die No. 7
For processing aluminum and mild steel from 0.2 - 0.27 in.
1 unit
1884878
Set of 2
1264137
Set of 5
1264139
Wear plate
Protects the die holder against excessive wear
1 unit
2260202
Set of 2
1264373
Set of 5
1264374
Punch guide
1 unit
2260203
Set of 2
1264366
Chip bag
To collect chips
1 unit
109275
Punching and nibbling oil for aluminum
1 qt. bottle
125874
Punching and nibbling oil for steel
17 oz. bottle
103387
Roller holder
Special for coil applications. Ideal for cutting in reverse.
1 unit
1284047
TRUMPF Box L2
1 unit
1763686
TruTool N 700
| |
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 7 mm |
| Maximum sheet thickness, steel 600 N/mm² | 5 mm |
| Maximum sheet thickness, steel 800 N/mm² | 3.5 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 10 mm |
| Radii | |
| Smallest radius | 140 mm |
| General | |
| Working speed | 1.3 m/min |
| Stroke rate at nominal load | 300 1/min |
| Starting hole diameter | 50 mm |
| Nominal input power | 1600 W |
| Weight | |
| Weight without cable | 8.3 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
