For closing angle and standing seams
The TruTool F 125 closes angle and standing seams with a spring-loaded hammer. This gives you tightly closed seams with consistent quality, even with variations in sheet thickness. The maximum seam height is 1.57 in. The free-standing tool allows you to work well even in tight corners and angles.
Close the seam with consistently high quality, even in corners and angles.
The sheet and seam thickness are controlled manually and minor variations in sheet thickness are evened out.
For standing and angle seams
For closing prepared standing and angle seams.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unit 1763681
Find the right consumables and accessories for your machine here.
TruTool F 125
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm² (maximum)||1.25 mm|
|Maximum fold thickness||5 mm|
|Flange height (H)||40 mm|
|Working speed||5 m/min - 6 m/min|
|Stroke rate at nominal load||1850 1/min|
|Nominal input power||550 W|
|Weight without cable||2.8 kg|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.