Country/region and language selection

Edge forming with edge trimmers and bevellers

Find out more about oxide-free cutting edges, emission-free working, and how to produce visible edges and welding edges in a single operation.

Edge trimmer process

Edge trimmer process

Edge trimmers use rotating milling heads to produce oxide-free chamfers. The machine does not require clamping into the workpiece, just guiding along the edges. An impeller guides the machine.

Edge trimmers break or round off sharp edges or prepare small weld seams. With dimensional accuracy and in one operation. Post-processing is unnecessary. The emission-free principle is an excellent alternative to angle grinders. 

Advantages

  • Oxide-free cutting edges, emission-free
  • Only one processing step
  • Dimensionally accurate edges

Beveller process

Beveller process

TRUMPF patented the original "bevelling tool for metal edges" over 50 years ago. We still use this unique cutting tool principle in our bevellers today and thus guarantee outstanding weld seam preparation.

The process is free of emissions and any significant heat influence. The working process does not generate any dust, vapours or flying sparks. This prevents structural changes in the metal and excludes chemical processes

The low surface roughness and oxide-free bare metal surfaces guarantee weld connections with a high load-bearing capacity. Post-processing is no longer necessary because the beveller ensures that the material is pushed away evenly and cleanly. Bevelling can start or end at any point on the edge to be processed.

Advantages

  • Emission-free
  • Oxide-free cutting edges, bare metal
  • Cutting tools can be reground several times for a long tool life
  • Adjustment of the sheet thickness without tools

You may also find these topics interesting

Image of the technology inside the TRUMPF deburrer
Edge trimmer

With the TRUMPF edge trimmers, you can obtain an accurate edge of consistently good quality in a single operation.

Image of the technology inside the TRUMPF beveler
Bevellers

The TRUMPF bevellers ensure high-quality edges in sheet metal, tubes, interior cutouts and curves.

Image of the technology inside the TRUMPF slitting shears
Power tools

For cutting and connecting to edge forming – TRUMPF's power tools, produced in Switzerland, lend a helping hand on construction sites and in workshops.

Contact
Power Tools Sales
Fax +41 58 257 64 01
Email
Service & contact