Country/region and language selection
Nibbler

TruTool N 160 12V LiHD rechargeable battery

Nibbler

TruTool N 160 12V LiHD rechargeable battery

Precise cutting with great performance on curves

Nibbler

TruTool N 160 12V LiHD rechargeable battery

Even cuts trapezoidal sheets up to a depth of 40 mm

Universal cordless machine for flat and corrugated sheets

The compact 12V cordless machine is ideal for cutting flat and corrugated sheets measuring up to 1.6 mm thick. Cutting is corrosion-free and without distortion and the 4.0 Ah / 12V-LiHD rechargeable battery provides long runtimes. The soft grip ensures a secure hold and enables low-vibration operation. With the optionally available extension, you can always extend the range of applications and thus also cut deep profiles. The tools can be changed very easily using the rotary knob.

Just right

Compact and practical 12V rechargeable battery. Compatible in its voltage class and with the 12V-36V recharger.

Brushless motor

Almost unlimited service life, virtually wear-free and hardly any maintenance required. Battery performance per charge is also increased.

For optimum performance on curves

The cutting tool can be rotated in 8 steps of 45° without tools.

Change without tools

You can change dies and punches quickly without additional tools.

Compact, lightweight, and ergonomic

The TruTool N 160 fits comfortably in your hand with its weight of 1.5 kg and an optimal grip circumference.

Long service life

The rotating punch reduces wear by ensuring the tool wears down evenly.

Nibblers: Video on the area of application
TruTool N 160 12V LiHD rechargeable battery, dimensional drawing

Leading

The world's most powerful battery technology with 30 years of battery expertise from Metabo. Full compatibility within the 12V class – also with CAS partner machines. Universal recharger, regardless of whether you use 12V, 18V or 36V CAS rechargeable batteries.

Battery technology

LiHD rechargeable battery technology means more power, service life and runtime. It charges reliably using process-controlled charging and discharging management. The cells are protected by minimal temperature build-up and permanent electronic single cell protection (ESCP), even when used over very long periods. The result: high-quality materials and intelligent battery management combined with brushless motors and power-head technology mean longer runtimes. The rechargeable battery pack's outer rubber coating also provides secure and non-slip stability as well as impact protection.

Ideal for cutting thin metal

You even achieve optimum results when processing sheets measuring between 0.5 mm and 1 mm thick.

Compatible extension

The battery-powered and electric versions of the TruTool N 160 have an identical design to the battery-powered and electric models of the TruTool N 160 with extension. This means that the tool is compatible and can optionally be upgraded with an extension.

Flat sheet

For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.

Corrugated sheet

For trimming to length and cutting. For diagonal cuts, interior cutouts, and radial cuts.

The following consumables and the corresponding accessories are included in the scope of delivery.

Standard die
1 unit 2260178
Standard punch
1 unit 2260177
12V-36V recharger LG
1 unit, DE/CH version: 2569784 | 1 unit, GB version: 2569786 | 1 unit, USA version: 2569785
12V LiHD 4.0 Ah rechargeable battery (2 units)
1 unit 2598770
TRUMPF Box S2
1 unit 1763682
Belt clip
1 unit 2599016

Find the right consumables and accessories for your machine here.

Set

2 x punch and 1 x die

Set of 1  0141723
Punch

1 unit  2260177
Set of 5  1264083
Set of 10  1264084
Die

For processing steel 57,000 with sheet thickness 0.039 - 0.06 in.

1 unit  2260178
Set of 2  2260560
Set of 5  1264088
12V starter kit

1x LG 12V-36V recharger / 2x 12V LiHD 4.0 Ah rechargeable battery

1 Set (DE)  2598815
1 Set (GB)  2598819
1 Set (USA)  2598817
Belt clip

Suitable for the 12V LiHD battery machines

1 unit  2599016
LG 12V-36V recharger

For 12V and 18V LiHD rechargeable battery

1 unit (DE/CH)  2569784
1 unit (GB)  2569786
1 unit (USA)  2569785
12V LiHD 4.0Ah rechargeable battery

1 unit  2598770
Chip bag

To collect chips

1 unit  2498167
Extension

For deeper profile sheets

1 unit  2507897
TRUMPF Box S2

1 unit  1763682

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.

Small and handy

The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.

Optimal working speed

You can use the speed control to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed. You can use the speed controller if you frequently need to deal with radii and stainless steel, for example. A further benefit is that the motor protects the battery against overload, overheating, and deep discharge.

TruTool N 160 12V LiHD rechargeable battery
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 1.6 mm
Maximum sheet thickness, steel 600 N/mm² 1 mm
Maximum sheet thickness, steel 800 N/mm² 0.7 mm
Maximum sheet thickness, aluminium up to 250 N/mm² 2 mm
Radii  
Smallest radius 24 mm
General  
Working speed (max.) 2.2 m/min
Starting hole diameter 22 mm
Voltage 12 V
Dimensions  
Length 307 mm
Height 170 mm
Weight  
Weight (incl. rechargeable battery) 1.6 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

Cutting

To cut sheet metal, we can offer you sheet metal cutters, slitting shears, and nibblers. Find out more about the benefits to you here.

Perfect cuts straight away

A totally unique insertion mechanism: With the TruTool TPC 165 panel cutter, you can create interior cutouts and notches without the need for a starting hole.

TRUMPF products in the construction industry
Construction industry

Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

Contact
Power Tools Sales
Fax +41 58 257 64 01
Email
Services
Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Downloads
Service & contact