Privacy Settings

TRUMPF uses cookies to provide a variety of services, to continually improve these services and to display advertisements according to the interests of our visitors.

When your data is processed, it may be (for a limited time) that your data is transmitted outside of the EEA, for example, to the United States of America (art. 49 para. 1 lit a GDPR), where the high European standards of data protection do not apply. This means that the authorities can have access to the data for control and monitoring purposes, against which it may not be possible to exercise effective legal remedy or to assert the rights of the persons concerned.

By clicking on "Consent", you consent to the use of cookies for the pages trumpf.com, mytrumpf.com and their sub-pages. You also consent to the transmission of your personal data to recipients in third countries where the adequacy decision of the European Commission is not valid.

You can edit or revoke your cookie settings at any time in the Privacy settings.

Further details can be found in the Data protection declaration

Consent
Imprint
Privacy settings

You can set your browser as you wish and generally prevent the setting of cookies. You can then opt on a case-by-case basis whether to allow cookies, generally accept them or reject them.

If you have given us explicit consent to process your personal data, the following checkbox will contain a check mark. Any explicit consent from you to process your personal data can be revoked at any time by unchecking the following checkbox. Please note that up until revocation, the legal validity of consent-based processing remains unaffected.

By checking the following checkbox, you consent to the use of cookies for the website pages of trumpf.com, mytrumpf.com and their sub-pages, as well as to any transmission of your personal data to third countries.

Further details can be found in the Data protection declaration

Save
Imprint
Country/region and language selection
Search
Contact
India | EN
To MyTRUMPF
India | EN
Contact
To MyTRUMPF
TruTool N 500
TruTool N 500
Nibbler

TruTool N 500

REQUEST OFFER
Nibbler-welded-seams
Nibbler-welded-seams
Nibbler

TruTool N 500

For cuts across edges and welding seams.

REQUEST OFFER

Powerful in four directions

The TruTool N 500 offers unique versatility. Since you can cut in four directions, even backwards, you can dismantle tanks and containers, and process coils and workpieces with bends of up to 90°. The machine is also well-suited to cutting high-tensile materials. The optimal weight/performance ratio of 8.8 lbs. against a sheet thickness of 0.2 in. is particularly impressive.

4 cutting directions

The machine can be turned through 360° in 4 steps of 90°.

Rectangular punch with flexibility for profiles

Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.

Minimal force required

You work without feed force and, therefore, required force is reduced to a minimum.

Variable speed

The speed controller can be used to adjust the working speed to suit the specific cutting task.

Nibblers: Applications video
Dimensional drawing, TruTool N 500
TruTool N 500, dimensional drawing

4 cutting directions

With the TruTool N 500, you can even cut in reverse. Since you can pull the tool toward you horizontally, it is ideal for relief cuts. You can also move the nibbler vertically downward for tank dismantling. All of this is achieved with minimal force and no emissions.

Electro variable speed control
Variable speed

The speed control is highly efficient for work with scribed lines or with a template. It is also a very suitable choice for frequent processing of radii and stainless steel. You can adapt the working speed to the cutting task and the electronic overload protection offers yet another notable benefit. It has a protective effect on the motor.

Perfect for processing stainless steel

The TruTool N 500 is well-suited to cutting high-tensile materials. Specifically designed punches and dies ensure perfect cuts.

Zum Trennen und Besäumen von geraden Blechen

Flat sheet

For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.

For cutting folded sheet metal and beading

Profiles

For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.

Coil processing

For cutting coils. For relief cuts and sampling.

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool N 500, Stempel 5 / P5
Punch 5/P5 (integrated)

1 unit 2260199

TruTool N 500, Matrize 5
Die 5 (integrated)

1 unit 1884930

Zubehör Standbild
TruTool N 500 handle

1 unit 0974659

Zubehör Standbild
Allen key DIN 911-4

1 unit 0067849

Zubehör Standbild
Tube of grease "G1", 0.88 oz

1 unit 0344969

TRUMPF Box M3
TRUMPF Box M3

1 unit 1770951

Find the right consumables and accessories for your machine here.

TruTool N 500, punch 5 / P5
Punch 5 / P5

For profile sheets 3 - 5 mm

1 unit  2260199
Set of 5  1453365
TruTool N 500, punch 2 / 3
Punch 2 / 3

For flat sheets up to 3.2 mm and profile sheets up to 2 mm

1 unit  2260198
Set of 2  1453366
Set of 5  1453367
TruTool N 500, die No. 2
Die No. 2

For sheet thicknesses up to 2 mm in mild steel and stainless steel

1 unit  1884952
Set of 2  1264189
TruTool N 500, die No. 3
Die No. 3

For sheet thicknesses up to 3.2 mm in mild steel and stainless steel. Profile sheets up to 2 mm.

1 unit  1884951
Set of 2  1264172
TruTool N 500, die No. 5
Die No. 5

For sheet thicknesses up to 5 mm in mild steel. Profile sheets up to 3 mm.

1 unit  1884930
Set of 2  1264132
TruTool N 500, die P5
Die P5

Particularly well-suited to profile sheets 3 - 5 mm

1 unit  1884929
Set of 2  1264150
TruTool N 500, punch guide
Punch guide

1 unit  1884928
Set of 2  1264364
TruTool N 500, chip bag
Chip bag

To collect chips

1 unit  103557
TruTool N 500, standard set
Set

2 x punch 5 / P5 and 1 x die No. 5

Set of 1  1453368
Still image of accessories
Punching and nibbling oil for steel

500 ml bottle  103387
Still image of accessories
Punching and nibbling oil for aluminum

1,000 ml bottle  125874
Still image of accessories
Suspension eyelet

1 unit  97208
TRUMPF Box M3
TRUMPF Box M3

1 unit  1770951
TruTool N 500, set P5
Set P5

2 x punch 5 / P5 and 1 x die P5

Set of 1  1453369
TruTool N 500
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 5 mm
Maximum sheet thickness, steel 600 N/mm² 3.2 mm
Maximum sheet thickness, steel 800 N/mm² 2.5 mm
Maximum sheet thickness, aluminum up to 250 N/mm² 7 mm
Radii  
Smallest radius 90 mm
General  
Working speed 1.5 m/min
Stroke rate at nominal load 815 1/min
Starting hole diameter 41 mm
Nominal input power 1700 W
Weight  
Weight without cable 3.8 kg
PDF <1MB
Technical data sheet

The technical data of all product versions as a download.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

TRUMPF products in mechanical engineering and system construction
Mechanical engineering and system construction

Whether it's sheet metal design, repair work, or dismantling work, TRUMPF's machines and tools are used throughout the life cycle of machinery and systems.

Find out more
Cutting

To cut sheet metal, we can offer you sheet metal cutters, slitting shears, and nibblers. Find out more about the benefits to you here.

Find out more
TRUMPF products in the construction industry
Construction industry

Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

Find out more
Contact
Power Tools Sales
Phone 011 4057 6350
Fax 011 2922 1357
Email
Services
Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Service & contact