Cordless connecting – fast, economical, and independent
Joining of ventilation ducts is often performed on site at the construction site. With the battery machine, you are not reliant on the power supply and can work conveniently and cordlessly. The TruTool TF 350 LiHD rechargeable battery enables you to join coated or uncoated workpieces with material thicknesses of 0.8 mm to 4 mm. The resulting permanent connections can be performed in a single operation and require no additional connecting elements thereby ensuring maximum cost-effectiveness. The 4.0 Ah / 18V LiHD rechargeable battery also ensures long runtimes.
Cross-manufacturer rechargeable battery system for leading power tool brands. 100% compatibility in the 18-volt class.
Almost unlimited service life, virtually wear-free and hardly any maintenance required. Battery performance per charge is also increased.
The connection point is secure and resilient and the joining points are resistant to corrosion.
No screws or rivets are used. This saves money and simplifies handling.
Up to three parts can be connected together, even if the sheet thickness varies. For coated sheet metal, mild steel, stainless steel, aluminum, or with intermediate layers such as adhesive and plastic mats.
Joining frame profiles
For joining connection flanges on ventilation and heating ducts.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unti 1884902
1 unti 0128748
1 unti 0118132
1 unti 0053649
1 unti 0112929
1 unti 0067865
1 unti 0067857
1 unti 0067830
1 unti 1398728
1 unti 2598811
1 unit, DE/CH version: 2569784
1 unit, GB version: 2569786
1 unit, USA version: 2569785
1 unti 2282148
Find the right consumables and accessories for your machine here.
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Compact and powerful
The 18V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
Straight to the point
With the clinching process, the sheets of metal to be joined are placed on top of each other. Then the tool cuts a strip into the sheets in a combined punching and forming process. A form-fitting and corrosion-resistant connection joins the top and lower sheets as the materials flow into one another. The connection point solidifies resulting in a permanent connection without additional tools or heat.
The rectangular joining point appears as a shallow raised spot. This means that you have no interference contour, such as in the case of edges that you find with screws and rivets. The simple handling means no fasteners are required and the machine is quickly ready for use. The TruTool TF 350 can also be adapted to the desired application quickly and easily. Simply choose the relevant tool.
The TruTool TF 350 power fastener offers an impressively compact and slim design, which makes it particularly well-suited to uses where space is limited. The geometry of the tool also has a large throat depth with a minimal interference contour. This produces flawless connections when processing ventilation ducts. Application on tight corners and small flange widths is also no problem for the TruTool TF 350.
The joining zone is not exposed to thermal load or tension. The protective layer flows with the material during forming. This means that the material properties are unchanged, remain free of oxidation, and the surface structure is not damaged. There is no need for preliminary work or rework. An additional benefit is that clinching avoids material surface contamination. This is perfect for coated and uncoated materials; even sheet metal with a layer of oil is ideally suited to this.
TruTool TF 350 LiHD 18V rechargeable battery
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||3.5 mm|
|Maximum sheet thickness, steel 600 N/mm²||2.5 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||4 mm|
|Minimum sheet thickness||0.8 mm|
|Maximum joining force||25 kN|
|Maximum stroke rate||2 1/s|
|Minimum edge spacing||8 mm|
|Maximum edge spacing||58 mm|
|Maximum flange height (B)||36 mm|
|Weight (with 4 Ah rechargeable battery)||8 kg|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.