TruTool F 125, dimensional drawing
For closing angle and standing seams
The TruTool F 125 closes angle and standing seams with a spring-loaded hammer. This gives you tightly closed seams with consistent quality, even with variations in sheet thickness. The maximum seam height is 1.57 in. The free-standing tool allows you to work well even in tight corners and angles.
For angle and standing seams
Close the seam with consistently high quality, even in corners and angles.
Can be adjusted without tools
The sheet and seam thickness are controlled manually and minor variations in sheet thickness are evened out.
For standing and angle seams
For closing prepared standing and angle seams.
The following consumables and the corresponding accessories are included in the scope of delivery.
TRUMPF Box S1
1 unit 1763681
Find the right consumables and accessories for your machine here.
Top hammer
1 unit
102964
Bottom hammer
1 unit
105448
Plastic buffer
1 unit
105449
TRUMPF Box S1
1 unit
1763681
|
TruTool F 125
|
|
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel up to 400 N/mm² (max.) | 1.25 mm |
| General | |
| Max. lock seam thickness | 5 mm |
| Lock seam elevation (H) | 40 mm |
| Working Speed | 5 m/min - 6 m/min |
| Stroke rate with nominal load | 1850 RPM |
| Nominal power consumption | 550 W |
| Weight | |
| Weight without cable | 2.8 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
