TruTool C 160 with chip clipper, 12V LiHD rechargeable battery, dimensional drawing
Handy battery-powered machine with chip clipper
The TruTool C 160 12V LiHD rechargeable battery with integrated chip clipper for two-handed operation is ideal for notching work and interior cutouts of up to 1.6 mm in mild steel and 1.2 mm in stainless steel. It enables you to clip chips at any point. The cuts are free of deformation and of high quality, and the 4.0 Ah / 12V LiHD rechargeable battery guarantees long runtimes.
Just right
Compact and practical 12V rechargeable battery. Compatible in its voltage class and with the 12V-36V recharger.
Brushless motor
Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.
Chip cutter for two-handed operation
The chips are clipped with a three-quarter clockwise turn by means of a lever
For interior cutouts and notches
You can cut chips at any time and pull the machine out of the workpiece.
Flat sheet
For cutting and trimming straight sheets. For radial and interior cutouts as well as notching.
Profiles
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
Tubes
For cutting tubes.
Checker plate
For cutting checker plates. For radial and interior cutouts.
Rice grain sheet
For cutting rice grain sheets. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
Cut guide set, 2 units with screws (integrated)
Set of 2 0927708
Chip clipper (integrated)
1 unit 1884910
Straight cutter (integrated)
1 - 1.6 mm
Allen key DIN 911 - 2.5
1 unit 0067822
12V-36V recharger LG
1 unit, DE/CH version: 2569784 | 1 unit, GB version: 2569786 | 1 unit, USA version: 2569785
12V LiHD 4.0 Ah rechargeable battery (2 units)
1 unit 2598770
TRUMPF Box S2
1 unit 1763682
Belt clip
1 unit 2579850
Find the right consumables and accessories for your machine here.
Cutter CR
Ideal for stainless steel and spiral ducts
Set of 2
1264346
Set of 5
1264347
Straight cutter up to 1 mm
Ideal for sheet thicknesses up to 1 mm.
Set of 5
1264357
Set of 2
1264356
Curve cutter
Good performance cutting curves. For sheet thicknesses up to 1 mm.
Set of 2
1264358
Set of 5
1264359
Spare parts set
1x cut guide set, 1x chip clipper
Set of 1
0927709
Straight cutter 1 - 1.6 mm
Ideal for sheet thicknesses of 1 - 1.6 mm.
Set of 2
1264343
Set of 5
1264345
Cutter set
1 x straight cutter 1 mm, 1 x curve cutter
Set of 1
0913521
Chip clipper
For interior cutouts and notches
1 unit
1884910
Set of 2
1264370
Belt clip
Suitable for the 12V LiHD battery machines
1 unit
2599016
Cut guide set
2 units with screws
Set of 2
0927708
12V starter kit
1x LG 12V-36V recharger / 2x 12V LiHD 4.0Ah rechargeable battery
1 Set (DE)
2598815
1 Set (GB)
2598819
1 Set (USA)
2598817
LG 12V-36V recharger
For 12V and 18V LiHD rechargeable battery
1 unit (DE/CH)
2569784
1 unit (GB)
2569786
1 unit (USA)
2569785
12V LiHD 4.0Ah rechargeable battery
1 unit
2598770
TRUMPF Box S2
1 unit
1763682
Parallel stop
For cutting parallel strips with width of 35 - 300 mm
1 unit
0143439
Power-Head Technology
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimises energy loss and ensures even higher performance per battery charge.
Brushless motor
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Small and handy
The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. .All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 9 metres per minute. The speed controller is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
|
TruTool C 160 chip clipper, 12V LiHD rechargeable battery
|
|
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 1.6 mm |
| Maximum sheet thickness, steel 600 N/mm² | 1.2 mm |
| Maximum sheet thickness, aluminium up to 250 N/mm² | 2 mm |
| Spiral duct steel 400 N/mm² | 4 x 0.75 mm |
| Radii | |
| Smallest radius | L 48 mm / R 40 mm |
| General | |
| Working speed (max.) | 9 m/min |
| Starting hole diameter | 15 mm |
| Voltage | 12 V |
| Dimensions | |
| Length | 357 mm |
| Height | 88 mm |
| Weight | |
| Weight (incl. rechargeable battery) | 1.6 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Contact
Services
