Country/region and language selection
Battery-powered machines

TruTool C 250 chip clipper, LiHD 18V rechargeable battery

TruTool C 250 chip clipper, LiHD 18V rechargeable battery

Perfect for cutting spiral ducts

The most powerful cordless slitting shears

The TruTool C 250 with chip clipper and 18V LiHD rechargeable battery is the first cordless rechargeable slitting shear that cuts sheet thicknesses of 2.5 mm in mild steel and 1.5 mm in stainless steel. The integrated chip clipper enables you to cut off chips at any time with one hand and pull the machine out of the workpiece. Excellent for notching work and interior cut-outs. We have different blades available to match the application. The 4.0 Ah / 18V LiHD rechargeable battery also ensures long runtimes.

Cordless Alliance System

Cross-manufacturer battery system for leading power tool brands. 100% compatibility for over 180 machines in the 18-volt class.

Brushless motor

Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.

Chip clipper for single-handed operation

Chips can be easily cut with one hand at the touch of a button. Perfect for interior cutouts and notches.

Uniquely powerful

The first slitting shears with rechargeable battery for cutting mild steel up to 2.5 mm and stainless steel up to 1.5 mm.

Slitting shears: Video about the area of application
TruTool C 250 with chip clipper, LiHD 18V rechargeable battery, dimensional drawing

Cordless Alliance System

This product is part of the Cordless Alliance System. CAS means one battery for everything, 100% compatibility for machines, rechargeable battery packs and rechargers – regardless of manufacturer. The world's most powerful battery system with 30 years of battery expertise from Metabo. Maximum reliability, clear cost benefits and a sound investment.

Battery technology

LiHD rechargeable battery technology means more power, service life and runtime. It charges reliably using process-controlled charging and discharging management. The cells are protected by minimal temperature build-up and permanent electronic single cell protection (ESCP), even when used over very long periods. The result: high-quality materials and intelligent battery management combined with brushless motors and power head technology mean longer runtimes. The battery pack's outer rubber coating also provides secure and non-slip stability as well as impact protection.

For any application

We offer 5 different cutters: The CR cutter is ideal for processing stainless steel. The curve cutter provides outstanding performance for cutting curves. The spiral cutter is ideal for processing spiral ducts and cuts even sheet thicknesses of up to 3.6 mm quickly. There are two different cutters available for straight cuts: one cutter for processing thin sheets of up to 1.5 mm and one further cutter for use on sheet thicknesses of 1.5 – 2.5 mm

Flat sheet

For cutting and trimming straight sheets. For radial and interior cutouts, as well as notches.

Profiles

For cutting C-L-U profiles and longitudinal cuts in profile sheets.

Spiral ducts

For cutting spiral ducts. For sheet thicknesses of 4 x 0.9 mm or 6 x 0.6 mm in mild steel, and 4 x 0.6 mm in stainless steel.

Tubes

For cutting checker plates. For radial and interior cutouts.

Rice grain sheet

For cutting rice grain sheets. For radial and interior cutouts.

Checker plate

For cutting checker plates. For radial and interior cutouts.

Coil processing

For cutting coils. For relief cuts and sampling.

The following consumables and the corresponding accessories are included in the scope of delivery.

Straight cutter (integrated)
1.5 - 2.5 mm
Cutting blades, 2 units
Set of 2 1275275
18V LiHD 4 Ah rechargeable battery (2 units)
1 unit 2598811
12V-36V recharger LG
1 unit, DE/CH version: 2569784 | 1 unit, GB version: 2569786 | 1 unit, USA version: 2569785
TRUMPF Box S2
1 unit 1763682

Find the right consumables and accessories for your machine here.

Cutter plate

1 unit  1267770
Cutter CR

Ideal for sheet thicknesses 0.5 - 1.5 mm

Set of 2  1279142
Set of 5  1279143
Cutter SC

Ideal for spiral ducts up to 4 x 0.9 mm

Set of 2  1279109
Set of 5  1279110
Straight cutter 0.5 - 1.5 mm

Ideal for sheet thicknesses 0.5 - 1.5 mm

Set of 2  1279107
Set of 5  1279108
Curve cutter

Excellent performance on curves. For sheet thicknesses up to 0.5 - 1.5 mm. Left 45 mm / right 80 mm

Set of 2  1279145
Set of 5  1279146
Cut guide set

2 units with screws

Set of 1  1275275
Straight cutter 1.5 - 2.5 mm

Ideal for sheet thicknesses 1.5 - 2.5 mm

Set of 2  1279105
Set of 5  1279106
18V starter kit

1x LG 12V-36V recharger / 2x 18V LiHD 4.0 Ah rechargeable battery

1 Set (DE)  2598816
1 Set (GB)  2598820
1 Set (USA)  2598818
LG 12V-36V recharger

For 12V and 18V LiHD rechargeable battery

1 unit (DE/CH)  2569784
1 unit (GB)  2569786
1 unit (USA)  2569785
18V LiHD 4.0Ah rechargeable battery

1 unit  2598811
TRUMPF Box S2

1 unit  1763682
Torx screwdriver

With T-handle TX20

1 unit  1775531

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimises energy loss and ensures even higher performance per battery charge.

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.

Compact and powerful

The 18V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. .All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.

Optimal working speed

You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.

TruTool C 250 chip clipper, LiHD 18V rechargeable battery
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 2.5 mm
Maximum sheet thickness, steel 600 N/mm² 1.5 mm
Maximum sheet thickness, aluminium up to 250 N/mm² 3 mm
Spiral duct steel 400 N/mm² 4 x 0.9 mm
Spiral duct steel 600 N/mm² 4 x 0.6 mm
Radii  
Smallest radius L 45 mm / R 80 mm
General  
Working speed (max.) 10 m/min
Starting hole diameter 22 mm
Voltage 18 V
Dimensions  
Length 398 mm
Height 119 mm
Weight  
Weight (incl. rechargeable battery) 2.5 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

Diese Themen könnten Sie auch interessieren

TRUMPF products in the construction industry
Construction industry

Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

Shear cutting process
Chip-free cutting

TRUMPF shears: for work without a loss of material when slight deformation of the material is not important for the application.

Contact
Power Tools Sales
Fax +44 1582 399261
Email
Dealer locator
Find out where you can buy TRUMPF Power Tools in the UK Find out more
Services
5-year guarantee Find out more Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Downloads
Service & contact