Country/region and language selection
Deburrers

TruTool TKA 1500

Deburrers

TruTool TKA 1500

For holes from 80 mm

Uncompromisingly good edges

The robust TruTool TKA 1500 creates precisely fitting chamfer lengths of up to 15 mm at angles of 30°, 45° and 60°. The chamfer length can be set as required and without the need for any tools. You can then achieve instant high-quality, repeatable edges without any reworking. With the TruTool TKA 1500, you can produce clean visible edges, break sharp edges, apply a radius or prepare a weld seam. The efficient milling process is up to five times faster than competitor processes. Oxidation or deformation of the material is avoided. With an ergonomic guide and motor handle, the machine is unrivalled in its ease of use.

Excellent guidance

Handle shape, size and positioning are perfectly designed to ensure ergonomic working.

In the blink of an eye

Chamfer lengths can be set as required without the need for any tools.

Consistent edge quality

High-quality results with burr- and oxide-free surfaces, dust-free, without material change and at a constant angle adjustment.

Versatile use

For straight edges, inner and outer contours and holes from 80 mm.

Edge trimmers: Video on the area of application
Dimensional drawing, TruTool TKA 1500

This is speed

TruTool TKA 1500 is equipped with a powerful and robust motor. Chamfer lengths of up to 11 mm can then be produced in one operation. Chamfer lengths from 11 mm to 15 mm require two steps. For example, a 15 mm chamfer length can be produced by achieving 11 mm in the first operation and the rest in step two.

Long service life

We offer high-quality multi-edge cutters and radius multi-edge cutters for a wide range of materials. Standard multi-edge cutters have four cutting edges. In contrast, radius multi-edge cutters have three cutting edges.

With or without

The TruTool TKA 1500 comes with the 45° multi-edge cutter mount as standard. You can also purchase the machine without tools and choose the right 30° or 60° multi-edge cutter mount for your application or the radius multi-edge cutter mount.

Practical

If you frequently cut long, straight sheets and outer contours, we recommend using the supplied chip protection. Chips then fall to the floor in a way that makes it easy to sweep them up afterwards. By the way, it also increases your work safety.

T-beam and flat sheet

For rounds with a radius of 2 mm, 3 mm, or 4 mm. For deburring and weld seam preparation.

For inner and outer edges

For rounds with a radius of 2 mm, 3 mm, or 4 mm. For deburring and weld seam preparation.

The following consumables and the corresponding accessories are included in the scope of delivery.

Lubricating grease "G3", 100 g
1 unit 0353969
4 multi-edge cutters. For steel, stainless steel and aluminum
Integrated
Case
1 unit 2398010
45° multi-edge cutter mount
Integrated
Box for small parts
1 unit 0353966
Safety glasses
1 unit 2488915
Screwdriver set
1 set 2467043
Run-in guide
1 unit 2420198
Chip protection
1 unit 2424143

Find the right consumables and accessories for your machine here.

Multi-edge cutter mount R

With impeller Ø 36.2 mm for 4 multi-edge cutters.

1 unit  2423977
45° multi-edge cutter mount

With impeller Ø 36.2 mm for 4 multi-edge cutters

1 unit  2423973
60° multi-edge cutter mount

With impeller Ø 36.2 mm for 4 multi-edge cutters

1 unit  2423976
Multi-edge cutters CR radius 2

For stainless steel

Set of 10  1232691
Set of 4  2435973
30° multi-edge cutter mount

With impeller Ø 36.2 mm for 4 multi-edge cutters

1 unit  2423975
Run-in guide

1 unit  2420198
Multi-edge cutters ST radius 4

For steel and aluminum

Set of 4  2435971
Set of 10  1630310
Multi-edge cutters

For steel, stainless steel and aluminum

Set of 10  2420323
Set of 4  2420322
Multi-edge cutters ST radius 2

For steel and aluminum

Set of 10  1232676
Set of 4  2435949
Case

1 unit  2398010
Lubricating grease G3

100 g  0353969
Box for small parts

1 unit  0353966
Safety glasses

1 piece   2488915
Screwdriver set

Allen 5 mm, Allen 6 mm and TORX screwdriver T15 x 118

1 unit  2467043
Punching and nibbling oil for steel

500 ml  0103387
Multi-edge cutters ST radius 3

For steel and aluminum

Set of 10  1232671
Set of 4  2435950
Punching and nibbling oil for aluminum

1000 ml  0125874
Chip protection

1 unit  2424143
viewport test images /w Retina support

Excellent guidance

viewport test images /w Retina support

In the blink of an eye

TruTool TKA 1500 without tool
TruTool TKA 1500 45° tool
Maximum chamfer lengths / Maximum chamfer heights    
Maximum chamfer length, steel 400 N/mm² 15 mm 15 mm
Maximum chamfer height, steel 400 N/mm² 10.6 mm 10.6 mm
Maximum chamfer length, steel 600 N/mm² 12 mm 12 mm
Maximum chamfer height, steel 600 N/mm² 8.5 mm 8.5 mm
Maximum chamfer length, steel 800 N/mm² 10 mm 10 mm
Maximum chamfer height, steel 800 N/mm² 7.1 mm 7.1 mm
Maximum chamfer length, aluminium 250 N/mm² 15 mm 15 mm
Maximum chamfer height, aluminium 250 N/mm² 10.6 mm 10.6 mm
Radii    
Smallest inner radius 30 mm 30 mm
Smallest bore hole (Ø) 55 mm 55 mm
General    
Minimum sheet thickness 3 mm + hs 3 mm + hs
Working speed (max.) 1.5 m/min 1.5 m/min
Nominal power consumption 2600 W 2600 W
Dimensions    
Length 679 mm 679 mm
Height 197 mm 197 mm
Weight    
Weight 10 kg 10 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Commercial vehicles and transport
Commercial vehicles and transport

From tanks to ship panels and even agricultural and construction machinery, TRUMPF's products process an enormous range of materials in the commercial vehicles and transport industry.

TRUMPF products in mechanical engineering and system construction
Mechanical engineering and system construction

Whether it's sheet metal design, repair work, or dismantling work, TRUMPF's machines and tools are used throughout the life cycle of machinery and systems.

Image of the technology inside the TRUMPF slitting shears
Power tools

For cutting and connecting to edge forming – TRUMPF's power tools, produced in Switzerland, lend a helping hand on construction sites and in workshops.

Contact
Power Tools Sales
Fax 011 2922 1357
Email
Dealer search
Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Services
Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Download
Service & contact