Powerful and safe
The TruTool TKF 1500 is equipped with a powerful 2,600 W motor.Hand protection, integrated on the motor, ensures a high degree of user-friendliness and safe operation. The soft grip ensures user-friendly operation with low vibrations. This means you can always expect consistent, oxide-free results. Regardless of whether you are processing straight sheets, T-beams, or tubes. The surface roughness remains low.
For straight edges and radius edges
Weld seam preparation on outer and inner contours. With interior cutout diameters from 5 inches. Also for T-beams and double T-beams.
Weld seam preparation on tubes with an inside diameter from 1.2 inches.
The following consumables and the corresponding accessories are included in the scope of delivery.
Find the right consumables and accessories for your machine here.
TruTool TKF 1500
|Maximum chamfer lengths / Maximum chamfer heights|
|Maximum chamfer length, steel 400 N/mm²||15 mm|
|Maximum chamfer height, steel 400 N/mm²||10.6 mm|
|Maximum chamfer length, steel 600 N/mm²||9 mm|
|Maximum chamfer height, steel 600 N/mm²||6.4 mm|
|Maximum chamfer length, steel 800 N/mm²||6 mm|
|Maximum chamfer height, steel 800 N/mm²||4.2 mm|
|Smallest radius||55 mm|
|Working speed (max.)||2 m/min|
|Nominal power consumption||2600 W|
|Sheet thickness||4 mm - 160 mm|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.