Country/region and language selection
TruTool S 450
TruTool S 450

TruTool S 450

For heavy-duty tasks

The TruTool S 450 is equipped with a robust cutting table specifically designed for thick sheet. This enables you to produce high-quality cuts in sheet thicknesses of up to 0.177 in. Above all, the machine is particularly well-suited for processing stainless steel up to 0.1 in. You can cut radii starting from 1.37 in without force. With a working speed of 19.5 feet per minute, you can progress quickly with your work. This is particularly advantageous when processing large sheets. The cutters can be adjusted quickly and easily to the sheet thickness using a rotary knob.

Particularly powerful in thick sheets

Powerful 1400 W motor with a cutting table specifically designed for thick sheet.

Adjustment without the need for tools

Cutter height adjustment enables individual adaptation to the sheet thickness.

Extremely user-friendly

The bow-handle, for one-hand and two-hand operation, ensures reliable machine control.

Long service life

The cutters each have two cutting edges and can be used either at the top or bottom.

Shears: Video on the area of application
Dimensional drawing, TruTool S 450
TruTool S 450, dimensional drawing

TruTool S 450, flat sheet

Flat sheet

Cutting and trimming of flat sheets. For radial and interior cutouts as well as notching.

TruTool S 450, coil

Coil processing

For cutting coils. For relief cuts and sampling.

TruTool S 450, grid


For cutting the most diverse wire grids.

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool S 350/450, cutter


Still image of accessories
Allen key DIN 911-2

1 unit 0002946

Still image of accessories
Allen key DIN 911-5

1 unit 0067857

Still image of accessories
Grease gun (filled with "G1")

1 unit 1369906

Still image of accessories
Tube of grease "G1", 0.88 oz

1 unit 0344969


1 unit 1770890

Find the right consumables and accessories for your machine here.

TruTool S 350/450, cutter

For steel up to 400 N/mm2

Set of 2  140451
TruTool S 350/450, cutter CR
Cutter CR

For high-tensile sheets up to 800 N/mm2

Set of 2  140452
TruTool S 350/450, work station with pedestal
Work station with pedestal

For the stationary processing of small workpieces and wire grids

1 unit  918382
TruTool S 450, work station without pedestal
Workstation without pedestal

For the stationary processing of small workpieces and wire grids.

1 unit  979371
TruTool, pedestal

Pedestal for work station

1 unit  3677

1 unit  1770890
Height adjustment without tools

Height adjustment without tools

The handy marking points on the rotary knob make it easy to adjust the cutters, for curves or straight cuts. The perfect setting is available for every application and sheet thickness. This facilitates sheet metal processing, enabling you to carry out work effortlessly.

2-way blade rotation

Two-way blade rotation

You can achieve high-quality cutting results due to the secure cutter attachment. If the cutting performance decreases, you can rotate the cutter by 180° and continue working with a new cutting edge. The result is optimum cut quality, combined with a long tool life.

Optimal working speed

An easy-to-use speed controller on the motor regulates the stroke rate and adapts to the respective application. This is particularly well-suited for working with scribed lines, where radii and stainless steel are frequently processed. Reducing the stroke rate achieves the optimal torque, especially for processing sheet thicknesses from 0.16 inches. Lower speeds are recommended for cutting stainless steel. The speed controller can be used to adjust the working speed in line with the respective working situation.

TruTool S 450
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 4.5 mm
Maximum sheet thickness, steel 600 N/mm² 3.5 mm
Maximum sheet thickness, steel 800 N/mm² 2.5 mm
Maximum sheet thickness, aluminum up to 250 N/mm² 5 mm
Smallest radius R 35 / L 25 mm
Working speed 4 m/min - 6 m/min
Stroke rate at nominal load 1800 1/min
Starting hole diameter 75 mm
Nominal input power 1700 W
Weight without cable 6.2 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

5-year guarantee Find out more Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Service & contact