Country/region and language selection
TruTool C 250 chip clipper
TruTool C 250 chip clipper
Slitting shears

TruTool C 250 with chip clipper

Slitting shears

TruTool C 250 with chip clipper

For perfect curved cuts

Unbeatable and powerful

The TruTool C 250 provides unmatchable performance. It cuts sheet thicknesses of 0.1 in. in mild steel and 0.06 in. in stainless steel. It offers a unique added benefit in the form of the integrated chip clipper, which can be operated with one hand. This enables you to cut chips with one hand at any time and pull the machine out of the workpiece. The easily visible marks on the cutting head mean that you can re-position the machine accurately at any time. The TruTool C 250 offers an impressive top cutting speed of up to 10 feet per minute.

Chip clipper for single-handed operation

Chips can be easily cut with one hand at the touch of a button without difficulty.

Extremely powerful

The most powerful model of its class. For mild steel of up to 0.1 in. and stainless steel of up to 0.06 in.

For interior cutouts and notches

You can cut chips at any time and pull the machine out of the workpiece.

For any application

For perfect results, you can choose between 5 different cutters.

Slitting shears: Video about the area of application
Dimensional drawing, TruTool C 250
TruTool C 250 with chip clipper, dimensional drawing

TruTool C 250, cutter
Outstanding service life

We offer 5 different cutters: The CR cutter is ideal for processing stainless steel. The curve cutter cuts with excellent contouring. The spiral cutter is ideal for spiral ducts and cuts even sheet thicknesses of up to 0.14 in. quickly. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 0.06 in. and one for use in sheet thicknesses of 0.06 - 0.01 in.

Flat sheet

For cutting and trimming flat sheets. For radial and interior cutouts as well as notches.


For cutting C-L-U profiles and longitudinal cuts in profile sheets.

For cutting spiral ducts

Spiral ducts

For cutting spiral ducts. For sheet thicknesses in mild steel of 4 x 0.035 in. or 6 x 0.024 in. and 4 x 0.024 in. in stainless steel.


For cutting tubes.

Zum Trennen von Coils und Befreiungsschnitte

Coil processing

For cutting coils. For relief cuts and sampling.

Diamond plate

For cutting diamond plate. For radial and interior cutouts.

Corrugated sheet metal

For cutting corrugated sheet metal. For radial and interior cutouts.

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool C 250, straight cutter 0.06 - 0.1 in.
Straight cutter (integrated)

0.06 - 0.1 in

TruTool C 250, cutting strip set
Cutting blades, 2 units

Set of 2 1275275


1 unit 1763681

Find the right consumables and accessories for your machine here.

TruTool C 250, straight cutter 1.5 - 2.5 mm
Straight cutter 1.5 - 2.5 mm

Ideal for sheet thicknesses 1.5 - 2.5 mm

Set of 2  1279105
Set of 5  1279106
TruTool C 250, straight cutter 0.5 - 1.5 mm
Straight cutter 0.02 -0.06 in.

Ideal for sheet thicknesses 0.02 - 0.06 in.

Set of 2  1279107
Set of 5  1279108
TruTool C 250, cutter SC
Cutter SC

Ideal for spiral ducts up to 4 x 0.035 in.

Set of 2  1279109
Set of 5  1279110
TruTool C 250, cutting strip set
Cutting strip set

2 units with screws

Set of 1  1275275
TruTool C 250, cutter plate
Cutter plate

1 unit  1267770
Torx screwdriver
Torx screwdriver

With T-handle TX20

1 unit  1775531

1 unit  1763681
TruTool C 250 with chip clipper
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 2.5 mm
Maximum sheet thickness, aluminum up to 250 N/mm² 3 mm
Spiral duct, steel 400 N/mm² 4x 0,9 / 6 x 0,6 mm
Spiral duct, steel 600 N/mm² 4x 0,6 mm
Smallest radius 45 mm
Working speed 3 m/min - 10 m/min
Stroke rate at nominal load 2400 1/min
Starting hole diameter 22 mm
Nominal input power 550 W

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

5-year guarantee Find out more Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Service & contact