Powerful in four directions
The TruTool N 500 offers unique versatility. Thanks to the option of cutting in four directions, i.e. also backwards, you can dismantle tanks and containers, cut coils and process workpieces with bends of up to 90°. The machine is also ideal for cutting high-tensile materials. The optimal weight/performance ratio of 4 kg against a sheet thickness of 5 mm is particularly impressive.
The machine can be rotated 360° in 4 steps of 90°.
Ideal for work in hard-to-reach areas and for cuts across edges and welding seams.
You work without feed force and so reduce the effort required to a minimum.
You can use the speed controller to adjust the working speed to suit the individual cutting task.
For cutting straight sheets and producing sections from them. For notches, as well as radial and interior cutouts.
For cutting profiles, cuts across edges and welding seams, as well as for dismantling tanks and containers.
For cutting coils. For relief cuts and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unit 2260199
1 unit 1884930
1 unit 0974659
1 unit 0067849
1 unit 0344969
1 unit 1770951
Find the right consumables and accessories for your machine here.
For profile sheets 3 - 5 mm
For flat sheets up to 3.2 mm and profile sheets up to 2 mm
For sheet thicknesses up to 2 mm in mild steel and stainless steel
For sheet thicknesses up to 3.2 mm in mild steel and stainless steel. Profile sheets up to 2 mm.
For sheet thicknesses up to 5 mm in mild steel. Profile sheets up to 3 mm.
Particularly well-suited to profile sheets 3 - 5 mm
To collect chips
2 x punch 5 / P5 and 1 x die No. 5
2 x punch 5 / P5 and 1 x die P5
TruTool N 500
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||5 mm|
|Maximum sheet thickness, steel 600 N/mm²||3.2 mm|
|Maximum sheet thickness, steel 800 N/mm²||2.5 mm|
|Maximum sheet thickness, aluminium up to 250 N/mm²||7 mm|
|Smallest radius||90 mm|
|Working speed||1.5 m/min|
|Stroke rate at nominal load||815 1/min|
|Starting hole diameter||41 mm|
|Nominal power consumption||1700 W|
|Weight without cable||3.8 kg|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.