TruTool N 1000, dimensional drawing
Powerful heavy-duty machine
The TruTool N 1000 has been specifically designed for use with thick sheets. It is well-suited in particular to use for dismantling tanks and containers. It cuts through doubled sheets as well as bends of up to 90°. You can use the TruTool N 1000 for nibbling through sheet thicknesses of up to 0.4 in. without feed force. It offers non-fatigue operation despite a machine weight of 32.4 lbs. The handle can be rotated through 180°, providing perfect guidance of the machine.
Perfect cuts with 2-speed motor
Choose the right speed for the material thickness, strength, and type of workpiece.
4 cutting directions
The machine can be turned through 360° in 4 steps of 90°.
Rectangular punch with flexibility for profiles
Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.
A powerful 2600 watts
Powerful motor and sophisticated gear technology. For outstanding ability to handle continuous loads.
Flat sheet
For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.
Profiles
For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.
Coil processing
For cutting coils, relief cuts, and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
Tube of grease "S1", 250 g
1 unit 0385478
Standard punch
1 unit 2260113
Die 10 (integrated)
1 unit 1884904
Tube of grease "S1", 25 g
1 unit 0121486
Punching and nibbling oil for steel, 500 ml
1 unit 0103387
Allen key DIN 911-12
1 unit 0067920
Handle
1 unit 0103555
Setting gauge
1 unit 1411767
Case
1 unit case 2277078
Find the right consumables and accessories for your machine here.
Wear plate
Protects the die holder against excessive wear
Set of 2
1264375
Set of 5
1264376
Die No. 10
For processing aluminum and mild steel from 0.27 - 0.39 in.
Set of 2
1264177
1 unit
1884904
Punch guide
1 unit
1884906
Set of 2
1264368
Die No. 5
For processing aluminum, mild steel, and stainless steel 114,000 up to 0.2 in.
1 unit
1884909
Die No. 7
For processing aluminum, mild steel, and stainless steel 85,000 from 0.2 - 0.27 in.
Set of 2
1264184
1 unit
1884905
Punch CR
For processing stainless steel 85,000 and 114,000
Set of 2
1264412
Set of 5
1264413
1 unit
2260114
Die P10
Well-suited for processing profile sheets from 0.27 - 0.39 in.
1 unit
1884903
Set of 2
1264185
Standard punch
For processing aluminum and mild steel 57,000
Set of 2
1264155
Set of 5
1264156
1 unit
2260113
Punching and nibbling oil for aluminum
1000 ml
0125874
Punching and nibbling oil for steel
500 ml
0103387
Case
1 unit
0121585
Chip bag
To collect chips
1 unit
0115215
|
TruTool N 1000 1st speed
|
TruTool N 1000 2nd speed
|
|
|---|---|---|
| Maximum sheet thicknesses | ||
| Maximum sheet thickness, steel 400 N/mm² | 10 mm | 8 mm |
| Maximum sheet thickness, steel 600 N/mm² | 7 mm | 5 mm |
| Maximum sheet thickness, steel 800 N/mm² | 5 mm | 4 mm |
| Maximum sheet thickness, aluminium up to 250 N/mm² | 12 mm | 10 mm |
| Radii | ||
| Smallest radius | 300 mm | 300 mm |
| General | ||
| Working speed (max.) | 1.1 m/min | 1.6 m/min |
| Starting hole diameter | 75 mm | 75 mm |
| Nominal power consumption | 2600 W | 2600 W |
| Dimensions | ||
| Length | 645 mm | 645 mm |
| Height | 301 mm | 301 mm |
| Weight | ||
| Weight | 14.7 kg | 14.7 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Contact
Services