Country/region and language selection

Punching sheet metal

In sheet metal processing, punching refers to a slitting process in which a sheet is cut through in a single stroke. Single strokes, which can occur in extremely rapid succession, create round holes in the sheet, for example. Outer contours can also be created with punching machines.

Punching

Punching process

Punched shapes are geometrically perfect: a punched hole is absolutely round. A punching machine functions like a hole punch for paper. The punch presses the paper against the hole support and then into a round opening. This cuts out a circular hole. The punched out offcuts are gathered in the punch container. Punching metal works in the exact same way: the sheet lies between the punch and the die. The punch moves down and dips into the die. The edges of the punch and die move past each other in parallel, cutting the sheet. This is why punching belongs to the shear cutting process group.

Perfectly punched metal in four steps

Four-stage punching process

To put it precisely, punching takes place in four phases. When the punch meets the sheet metal, the sheet initially becomes deformed. Then it is cut. Eventually, the tension within the material is so great that the sheet breaks along the cut contour. The punched piece of sheet metal – known as the punching slug – is ejected downward. When the punch moves back up, it may drag the sheet along with it. In this case, the stripper detaches the sheet from the punch. The larger the cutting part on the sheet edge, the better the edge quality. For precision fits, for example, the tool is first prepunched and then punched again with the final diameter using a slightly larger tool. The cut proportion of this kind of edge is then up to 100%.

Even more flexibility: combining punching and laser cutting

Punching is perfect for repeating shapes. For complex geometries where the punching tools must be changed frequently or which do not often occur consecutively, another tool comes into play: the laser. Depending on the application, with a punch laser machine you can use the quick punching tool with a high repetition speed or the slower, yet completely unrestricted in contouring, laser head. Find out how in this film.

Nibbling

TRUMPF Nibbler

In nibbling, the punch holes are set next to each other so that they overlap. This allows the creation of openings and contours of any shape. For example, nibbling is used for irregular shapes or shapes with a larger radius. The attachment points of individual strokes are visible on the nibbled edge. The points can also be felt by running a finger along the edge. The more the holes overlap, the smoother the edge will be. For this, the punching machine must make more strokes along a nibbling path.

You may also find these topics interesting

Image of TRUMPF nibbler technology
Nibbler

Whether you're performing coil cutting or working on containers or tanks, with the TRUMPF nibblers you always work without feed force, distortion, or sparks.

Punch laser machines

All the advantages of punch and laser processing combined: TRUMPF punch laser machines enable you to produce a wide range of parts in small or large quantities.

Punching, image of the technology
Punching machines

TRUMPF punching machines give you flexibility when processing a wide range of parts and enable you to form sheet metal parts and create threads – all on a single machine.

Contact
Roger Michaud
Email
Service & contact