Country/region and language selection
Nibbler

TruTool N 500

Nibbler

TruTool N 500

For cuts across edges and welding seams.

Powerful in four directions

The TruTool N 500 offers unique versatility. Since you can cut in four directions, even backwards, you can dismantle tanks and containers, and process coils and workpieces with bends of up to 90°. The machine is also well-suited to cutting high-tensile materials. The optimal weight/performance ratio of 8.8 lbs. against a sheet thickness of 0.2 in. is particularly impressive.

4 cutting directions

The machine can be turned through 360° in 4 steps of 90°.

Rectangular punch with flexibility for profiles

Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.

Minimal force required

You work without feed force and, therefore, required force is reduced to a minimum.

Variable speed

The speed controller can be used to adjust the working speed to suit the specific cutting task.

Nibblers: Applications video
TruTool N 500, dimensional drawing

4 cutting directions

With the TruTool N 500, you can even cut in reverse. Since you can pull the tool toward you horizontally, it is ideal for relief cuts. You can also move the nibbler vertically downward for tank dismantling. All of this is achieved with minimal force and no emissions.

Variable speed

The speed control is highly efficient for work with scribed lines or with a template. It is also a very suitable choice for frequent processing of radii and stainless steel. You can adapt the working speed to the cutting task and the electronic overload protection offers yet another notable benefit. It has a protective effect on the motor.

Perfect for processing stainless steel

The TruTool N 500 is well-suited to cutting high-tensile materials. Specifically designed punches and dies ensure perfect cuts.

Flat sheet

For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.

Profiles

For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.

Coil processing

For cutting coils. For relief cuts and sampling.

The following consumables and the corresponding accessories are included in the scope of delivery.

Tube of grease "G1", 0.88 oz
1 unit 0344969
Die 5 (integrated)
1 unit 1884930
Punch 5/P5 (integrated)
1 unit 2260199
Allen key DIN 911-4
1 unit 0067849
TruTool N 500 handle
1 unit 0974659
TRUMPF Box M3
1 unit 1770951

Find the right consumables and accessories for your machine here.

Punch guide

1 unit  1884928
Set of 2  1264364
Die No. 5

For sheet thicknesses up to 0.2 in. in mild steel. Profile sheets up to 0.12 in.

Set of 2  1264132
1 unit  1884930
Die P5

Particularly well-suited to profile sheets 0.12 - 0.2 in.

1 unit  1884929
Set of 2  1264150
Die No. 2

For sheet thicknesses up to 0.08 in. in mild steel and stainless steel

1 unit  1884952
Set of 2  1264189
Die No. 3

For sheet thicknesses up to 0.125 in. in mild steel and stainless steel. Profile sheets up to 0.08 in.

1 unit  1884951
Set of 2  1264172
Set P5

2 x punch 5 / P5 and 1 x die P5

Set of 1  1453369
Punch 2 / 3

For flat sheets up to 0.125 in. and profile sheets up to 0.08 in.

1 unit  2260198
Set of 2  1453366
Set of 5  1453367
Punch 5 / P5

For profile sheets 0.12 - 0.2 in.

1 unit  2260199
Set of 5  1453365
Set

2 x punch 5 / P5 and 1 x die No. 5

Set of 1  1453368
Punching and nibbling oil for aluminum

1000 ml  0125874
Punching and nibbling oil for steel

500 ml  0103387
TRUMPF Box M3

1 unit  1770951
Chip bag

To collect chips

1 unit  0103557
Suspension eyelet

1 unit  0097208
TruTool N 500
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 5 mm
Maximum sheet thickness, steel 600 N/mm² 3.2 mm
Maximum sheet thickness, steel 800 N/mm² 2.5 mm
Maximum sheet thickness, aluminium up to 250 N/mm² 7 mm
Radii  
Smallest radius 90 mm
General  
Working speed (max.) 1.5 m/min
Starting hole diameter 41 mm
Nominal power consumption 1700 W
Dimensions  
Length 381 mm
Height 235 mm
Weight  
Weight 3.8 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

TRUMPF products in the construction industry
Construction industry

Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

TRUMPF products in mechanical engineering and system construction
Mechanical engineering and system construction

Whether it's sheet metal design, repair work, or dismantling work, TRUMPF's machines and tools are used throughout the life cycle of machinery and systems.

Cutting

To cut sheet metal, we can offer you sheet metal cutters, slitting shears, and nibblers. Find out more about the benefits to you here.

Contact
Power Tool Sales
Power Tool Sales
Email
Dealer Locator
Search for your nearest TruTool Partner in the US, Canada or Mexico Find out more
Services
5-year guarantee Find out more Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Download
Service & contact