TruLaser Tube 7000

SeamLine Tube automatically detects weld seams and aligns tubes reliably. The touchpoint user interface selects the parameters automatically - this reduces operating effort and increases process reliability. The function also enables even more reliable seam detection and can automatically adjust cutting parameters in the area of the weld seam. This means you benefit from an automated and robust machining process.

ScanLine uses light section sensors to measure and compensate for raw material tolerances. Quality Pilot evaluates the raw material quality at the start of the process and decides whether and how often ScanLine should measure. This avoids unnecessary measuring cycles, saves time and ensures part quality at the same time.

The spatter protection device for round tubes ensures that the inside of tubes are clean, reducing rework.

Automatically checks whether slugs have fallen out of the cut contours in the tube. This increases safety and quality in the process as well as your good parts rate.

PierceLine monitors and controls the piercing process. This protects both the material and the machine, increases part quality and shortens processing times.

The Spatter Guard saves on reworking, as it reduces the adhesion of slag spatters to the inside of tube. To this end, it applies a release agent parallel to production, increasing the cleanliness not only of round tubes but also of closed profiles.

The clamping system with permanent sensor monitoring adapts to any tube geometry and always positions your tube centrally. The automatic force control ensures that even thin and unstable tubes are not deformed.

Conveyor tables at an ergonomic height make it easier to unload tubes and profiles. Finished parts can be sorted into different positions, with the unloading area also serving as a material buffer.

The integrated magnetic coupling protects against potential damage in the event of a cutting head collision. In this way, production can continue without readjustment or calibration. The new lateral air blast nozzle ensures faster and even more process-stable piercing.​

Save on cutting gas, increase process reliability: the innovative nozzle with patented nozzle geometry enables you to achieve average cutting gas savings of 33% when high-pressure cutting wall thicknesses of 1 to 3 mm. Thanks to the increased nozzle distance, process reliability is also improved.

Your machine thinks for itself: During the loading operation, the machine checks whether the correct tube has been loaded. The clamping system with automatic force control always clamps tubes centrally without deforming them. The machine also detects whether a part has been correctly discharged during unloading.

Label your parts quickly and reliably with a standardized industry code – the Dot Matrix Code feature enables this.

Vision Equipment with Smart View displays the Trulaser Tube 7000 from both the inside and outside in real time – either at the machine or remotely. Multiple cameras provide different perspectives. Enabling you to keep an eye on the machine at all times, regardless of where you are.​

The TruLaser Tube 7000 processes bevel cuts of up to 50°. This reduces downstream processing steps, e.g. for weld edge preparation, creates design freedom, and enables innovative tube designs.

With smart profile detection, you can load even profiles with challenging geometries automatically.

Identifies existing contours in tubes and aligns the cutting program precisely to them. Users can also process prefabricated or partially processed profiles safely and precisely.

Integrate flow drilling, tapping and twist drilling directly into the tube laser. The integrated work steps reduce subsequent work steps and parts handling, reduce the possibility of errors and thus increase the added value of a machine.

The swivel-mounted conveyor system with a length of up to 12.5 meters is particularly advantageous for intermediate production and for open or special profiles.

The TruLaser Tube 7000 processes and unloads tubes with a loading length of up to 12.5 m. Optimum nesting allows you to make much better use of your raw material. This reduces scrap and lowers your material costs. Finished parts of maximum loading length are unloaded reliably and safely.

To ensure the kilowatts actually reach the tube: Thanks to TRUMPF laser power control, you can deliver the optimum, high laser power to the tube. Take advantage of feed rate increases of up to 300% and the ability to process wall thicknesses of up to 20 mm mild steel.

The rigid machine frame and precise tube guides simultaneously provide particularly quick processing and high quality in the finished part.

The open machine concept and intelligent beam guard (laser class 1) offer you optimum accessibility and enable fast, ergonomic loading and unloading of profiles and tubes manually, automatically or by crane.

The new control panel adds a second 24-inch touchscreen to the Touchpoint HMI. You can view web-based content from TRUMPF Smart Services and Oseon directly at the machine.​

RapidCut enables the high feed rates of the solid-state laser to be used for smaller contours. RapidCut speeds up the process fourfold and thus ensures shorter throughput times.

Seamless integration of multiple TRUMPF machines into your own software environment is very easy. We have the right solution for every combination, whether it be integration into Oseon or a connection to monitoring and analysis tools. A connection to third-party software systems is also possible with our interfaces based on the OPC UA standard.