Expert for strips, tubes and profiles
The TruLaser Cell 1100 is a flexible beam guidance system that you can integrate easily into your production line. It is specially designed for the endless welding of any seam geometry on strips, tubes, and profiles. You have a lot of freedom when it comes to the material. With the laser welding system you can weld steel, stainless steel, aluminium and even non-ferrous metals, from a tenth of a millimetre up to several millimetres thick. Sensor systems for seam detection and tracking (e.g. SeamLine) increase flexibility, quality and reliability. Depending on the application and material, either CO2 or fibre lasers from TRUMPF are used.
Configure the machine that optimally adapts to you and your requirements.
State-of-the-art beam sources and sensor systems reduce operating costs and increase the speed.
The integrated operating panel ensures intuitive operation of your TruLaser Cell 1100.
The stroke of the linear axis, the working height and the traverse paths adapt to your line.
Welding optics with linear axes and sensor systems are the perfect addition to the machine.
Laser-welded profiles
The TruLaser Cell 1100 has been specially developed for the endless laser welding of tubes and profiles. Its compact structure enables it to be integrated problem-free into an existing profiling machine. The concept enables the tube/profile welding machine to be converted to various product geometries with minimal idle times. The robust construction and flexible beam guidance system ensure consistent process conditions and the highest quality.
Leak-proof, non-porous welding seam
Due to the high beam quality of TRUMPF lasers and the resulting efficient energy input to the workpiece, gas-tight and non-porous endless seams can be achieved without any melt deposits on the inner and outside walls of the tube.
Highly productive heat conduction welding with SpeedLas
For thin materials up to 0.4 mm, the SpeedLas optics from TRUMPF enable the highest process speeds. Using heat conduction welding, the physical effects of "Brewster's angle" are used to gain impressive increases in productivity.
|
TruLaser Cell 1100
|
TruLaser Cell 1100 (CO2-Laser)
|
|
|---|---|---|
| Axis travel range | ||
| X axis travel range | 300/500 mm | 300/500 mm |
| Z axis travel range | 300/500 mm | 300/500 mm |
| Q axis travel range | ± 25 mm | ± 25 mm |
| Maximum axis speeds | ||
| Maximum axis speed, axially parallel in X | 5 m/min | 5 m/min |
| Maximum axis speed, axially parallel in Z | 5 m/min | 5 m/min |
| Maximum axis speed of Q axis | 3 m/min | 3 m/min |
| Maximum axis accelerations | ||
| Maximum axis acceleration, axially parallel in X | 1.5 m/s2 | 1.5 m/s2 |
| Maximum axis acceleration, axially parallel in Z | 1.5 m/s2 | 1.5 m/s2 |
| Positioning accuracy | ||
| Positioning accuracy of linear axes (X, Z) | 0.1 mm | 0.1 mm |
| Laser | ||
| Maximum laser power | 3000 W - 12000 W | 3200 W - 15000 W |
| Available lasers | TruFiber | TruFlow |
High-end fixed optics for continuous welding with solid-state lasers. Reproducible solution for highly complex components. Includes alignment of the welding process on the component using VisionLine, as well as gas injection into the process zone via an MDE nozzle.
The TLS mirror focusing optics for CO2 laser radiation has a free aperture of 50 mm. The optics are equipped with welding nozzles to the coaxial and lateral gas supply. The focal lengths of the focusing mirror range from f = 100 mm to f = 300 mm.
The SeamLine sensor controls the seam position in the TRUMPF TruLaser Cell 1100 laser system. With an alternating incident light and light section measuring procedure, the system reliably detects gaps or bends and controls the position of the processing optics precisely and effectively over the workpiece.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
