The MultiBend Extended is the perfect choice if you need a higher number of different bending lengths and heights. Due to its modular construction, you can create different bending lengths up to 90 mm and heights up to 25 mm on your punching or punch laser machine in a single stroke. The bending sections of the tool can be changed quickly and easily, and are therefore particularly user-friendly. As the bending roller in the die begins its rotational movement before it touches the workpiece, you can achieve bends which are practically mark-free. On punch laser machines, a laser cut is also sufficient for release punching. This means you can reduce the degree of punching around flanges.
With the MultiBend Extended, you can create different bending lengths and heights up to an angle of 90° directly on your punching or punch laser machine in a single stroke. For you, this means a high level of flexibility and a reduction in your part costs as an additional operation is not required.
Different bending lengths and heights in just one stroke
Flexible bending due to modular design
Due to the complete processing on one machine, you can reduce your part costs.
Mark-free bending edge
Practically mark-free edges since the rotational movement of the bending roller starts before it touches the workpiece.
Reduced degree of punching
A laser cut is sufficient for release punching on your punch laser machine.
The bending sections of the tool can be changed quickly and easily.