When welding copper with a green wavelength, users benefit from a high absorption of laser light and high process efficiency. The green laser fully demonstrates its benefits in the field of heat conduction welding. Thanks to its special keyhole shape, even deep penetration welding only creates very few spatters. Regardless of the material surface - polished, brushed, oxidized or etched - copper welds can always be reliably produced with consistent quality with green laser radiation.
Welding copper - one application, a few challenges
Components made of copper play a key role in many sectors: whether it's e-mobility, electronics or in the jewelry and watchmaking industry. There are two main challenges when welding the highly reflective material: weld seams with consistently high weld quality and minimal spatter. This is where the laser comes into its own. High-strength connections which are also entirely reproducible and have high conductivity can be achieved with non-contact tools. And in comparison with TIG welding, no additional material is required which would make the component heavier.
Copper welding - stable and practically spatter-free
What different methods can be used to weld copper?
TIG welding, soldering, screwing - what are the advantages of copper welding with a laser in comparison with alternative methods?
Compared to TIG welding, screwing or soldering, this laser can produce consistent weld seams without additional material.
Copper welding with a laser inhibits the formation of pores thanks to optimized weld pool dynamics. Spatter is effectively reduced.
Regardless of the material surface composition, the green laser produces weld seams of a consistently high quality.
Welding copper and aluminum connections is possible with minimal mixing of materials (intermetallic phase), resulting in a high degree of stability and conductivity.
A laser is a non-contact tool with no wear. Components are not contaminated or damaged.
Copper connections for power electronics
The increasingly compact housings and the higher performance required for electronic components are also increasing the requirements for the joining technology used with copper components. Pulsed green lasers weld these materials with a high level of reproducibility and with almost no spatter - regardless of the surface properties.
Joining of dissimilar materials for cell contacts (busbars)
Lasers are ideally suited to sensitive battery cells as they complete their task without any contact and require little energy. The material is not mechanically stressed. The locally limited, low heat input ensures high-precision distortion-free seams.
Welding battery housings and cell connectors
Using TRUMPF lasers, customers can weld battery housings and cell connectors made from copper and aluminum effortlessly and with precise seams. In this manner, increasingly small and powerful cells can be integrated into a battery array. A comprehensive system of sensors monitors the quality of the weld seams and ensures precise welding depths here.
Hairpin welding for electric motors
Short pulse lasers are used in hairpin welding to remove the layer of insulating varnish without damaging the underlying copper. Thanks to the high level of reproducibility of laser welding processes, users achieve consistently high-tensile connections with a good level of conductivity - and this in high quantities for series production!
Copper welding with a green laser in the multi-kW range
Just fill out the form below and receive exclusive background information and more details in our white paper.